Mounting Clamps / Hangers - Bag of 20
Specifications
Sizes: 1/4'' or 3/8''
Types: Plastic, Stainless Steel, Clip-on or Rubber Coated Stainless Steel
Features:
Rust Proof
Solid Grip
Easy to Install
Compatible with a variety of hardware
Reduces vibration through the mist line
Perfectly matches our Stainless Steel Mist Lines, Nickel Plated Nozzles & Fittings for ultimate looks
Specifications
| Clamps Type | 1/4 Inch Plastic White or 1/4 Inch Plastic Black or 1/4 Inch Stainless Steel or 1/4 Inch Rubber & Stainless Steel or 1/4 Inch Clip on Hanger or 3/8 Inch Plastic White or 3/8 Inch Stainless Steel or 3/8 Inch Rubber & Stainless Steel or 3/8 Inch Rubber & Stainless Steel (Magnetic) Bag of 5 |
| Tags | |
|---|---|
| Tags | |
It works with most 1/4" OD flexible tubing.
Depending on the Misting Pump size; Mid or High pressure. These would work for a softening system.
Mid Pressure: Calcium Inhibitor Filter - Poly Phosphate Filter: Link: https://mistcooling.com/misting-calcium-inhibitor-filter-poly-phosphate-filter.html
High Pressure: 5in Commercial Filter. Link: https://mistcooling.com/commercial-filter-for-mist-pumps.html
Any large than the filters mentioned would be recommended for Hard Water.
The cartridge inside the housing should be changed every 6 months
If you are on the website scowl down to Description or Specifications.
Filter housings are rated for up to 125psi.
5 microns. You don't need to worry much about the GPM as this is used before the pump. You just want to make sure that the filter is changed every six months so that the unit doesn't struggle to get water through to the pump.