%20-%20Supports%2030%20Nozzles,%20Number%20of%20Tees%20%26%20Nozzles:%205,%20Tubing%20-%20High%20Pressure%20-%201-4%20Inch%20-%20Black%20-%2050%20Ft%20Roll,%20Misting%20Nozzle%20Orifice%20Size%20:%200.006%20inch-%20Lowest%20Flow)?unique=232cb9e)
Commercial Pre Cooling System | Air Conditioner Cooler
Air Conditioner Cooling | Furnace Cooling | Industrial Equipment Cooling
MC82080
Key Features:
- Reducing Equipment Energy Costs by Up To 30% (You Achieve the Same or Even More Cooling, With Much Less Energy).
- Allowing Equipment to Run More Efficiently, Thus Extending Its Life.
- Delaying Or Eliminating the Need for Additional Cooling Equipment.
- Optimizing Turbine Performance by Condensing Inlet Air.
- Keeping Heat-Generating Equipment Running a Peak Performance and Optimal Output.
- Increasing The Cooling Capacity of Air-Cooled Equipment, Allowing It to Operate at Full Capacity Even During Extreme Heat Conditions.
- Our Pre-Cooling Systems Can Be Used on Any Air-Cooled AC/Refrigeration, Cooling Towers, And Other Equipment.
Advantages of Running the Commercial Air Conditioner Cooling
- Head Pressure and Amperage Draw Are Reduced
- Output Temperature Is Reduced
- “Time-On” Cycles Are Reduced
- Energy Consumption Is Reduced
- The Coefficient of Performance (COP) Is Increased
- The Life of The Condenser Is Extended
- Cools Air Up To 40 Degrees
Manuals:
Pump Manual - 1500 PSI 0.30 GPM
Pump Manual - 1500 PSI 0.5 GPM, 1 GPM, 2 GPM
Video:
| Misting Pump Size - MC83100 | 1500 PSI Pump (0.30 GPM) - Supports 30 Nozzles, 1500 PSI Pump (0.50 GPM) - Supports 45 Nozzles, 1500 PSI Pump (1.0 GPM) - Supports 80 Nozzles, 1500 PSI Pump (2.0 GPM) - Supports 160 Nozzles |
| Number of Tees & Nozzles | Number of Tees & Nozzles: 5, Number of Tees & Nozzles: 10, Number of Tees & Nozzles: 20, Number of Tees & Nozzles: 30, Number of Tees & Nozzles: 40, Number of Tees & Nozzles : 50, Number of Tees & Nozzles : 60, Number of Tees & Nozzles : 70, Number of Tees & Nozzles : 80, Number of Tees & Nozzles : 90, Number of Tees & Nozzles : 100, Number of Tees & Nozzles : 110, Number of Tees & Nozzles : 120, Number of Tees & Nozzles : 130, Number of Tees & Nozzles : 140, Number of Tees & Nozzles : 150, Number of Tees & Nozzles : 160 |
| 1/4 Inch Tubing Roll Size | Tubing - High Pressure - 1/4 Inch - Black - 50 Ft Roll, Tubing - High Pressure - 1/4 Inch - Black - 100 Ft Roll, Tubing - High Pressure - 1/4 Inch - Black - 500 Ft Roll |
| Misting Nozzle Orifice Size | Misting Nozzle Orifice Size : 0.006 inch- Lowest Flow, Misting Nozzle Orifice Size : 0.008 inch, Misting Nozzle Orifice Size : 0.012 - Highest Flow |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.