KBN Ceramic Nozzles - Red- Low Flow
1/4-inch NPTM
Ceramic Misting Nozzles
Applications: Fire protection, moisture control, Dust Suppression, Deodorizing for Poultry farms, and Greenhouse applications.
Anti-drip, non-clogging with built-in strainer, high abrasion-resistant, non-corrosive, high abrasion resistant
40% larger free-pass Nozzle emits uniform, fine droplets for misting and atomizing.
70psi Minimum working pressure and 1500psi Maximum working pressure.
Features:
Also known as Ultra-Fine Atomizing Mist Nozzles, these are high-quality spray nozzles with ceramic orifices for extended life. Features a built-in check valve preventing drips when not in use
304 Stainless-Steel Screen
The free pass area is 40% larger than conventional nozzles
Emits uniform fine droplets for misting and atomizing at high efficiency
¼ Inch NPTM for easy mount
Poly Acetal resists corrosion
40% larger free-pass area than conventional Nozzles
It works with most 1/4" OD flexible tubing.
Depending on the Misting Pump size; Mid or High pressure. These would work for a softening system.
Mid Pressure: Calcium Inhibitor Filter - Poly Phosphate Filter: Link: https://mistcooling.com/misting-calcium-inhibitor-filter-poly-phosphate-filter.html
High Pressure: 5in Commercial Filter. Link: https://mistcooling.com/commercial-filter-for-mist-pumps.html
Any large than the filters mentioned would be recommended for Hard Water.
The cartridge inside the housing should be changed every 6 months
If you are on the website scowl down to Description or Specifications.
Filter housings are rated for up to 125psi.
5 microns. You don't need to worry much about the GPM as this is used before the pump. You just want to make sure that the filter is changed every six months so that the unit doesn't struggle to get water through to the pump.