MC31100 Canopy Logo Printing
Enhance your Branding with a custom logo on a Misting Tent
Our durable canopy will last for years to come
We ensure quality printing of your logo and text on the surfaces of your canopy to be bright and crisp from good files shared with us
Can see your logo from a distance as well as up close which draws visitors to your booth
Easy setup, takedown, and storage
Use the template below to upload your files
TEMPLATE
For additional information - please contact us
Toll-Free 888.493.5967 | Houston Area: 281.633.0109 | [email protected]
Specifications
| Canopy Printing | Canopy Printing: 10x10 Canopy Top or Canopy Printing: 10x20 Canopy Top |
| Side Wall: | None or Side Wall: 10 x 10 Half Side Wall or Side Wall: 10 X 20 Half Side Wall or Side Wall: 10 x 10 Full Side Wall or Side Wall: 10 x 20 Full Side Wall |
| Tags | |
|---|---|
| Tags | |
It works with most 1/4" OD flexible tubing.
Depending on the Misting Pump size; Mid or High pressure. These would work for a softening system.
Mid Pressure: Calcium Inhibitor Filter - Poly Phosphate Filter: Link: https://mistcooling.com/misting-calcium-inhibitor-filter-poly-phosphate-filter.html
High Pressure: 5in Commercial Filter. Link: https://mistcooling.com/commercial-filter-for-mist-pumps.html
Any large than the filters mentioned would be recommended for Hard Water.
The cartridge inside the housing should be changed every 6 months
If you are on the website scowl down to Description or Specifications.
Filter housings are rated for up to 125psi.
5 microns. You don't need to worry much about the GPM as this is used before the pump. You just want to make sure that the filter is changed every six months so that the unit doesn't struggle to get water through to the pump.