Outdoor Misting Fans - Wall Mount Fans - 18 Inch Fan - Non Oscillating
Simply mount the outdoor rated fan with the stainless steel fan misting ring, with provided hardware, and hook it up to any faucet or end of a garden hose to activate the mist. Each misting fan system comes with high-quality brass and stainless steel misting nozzles with the nickel-plated finish, 20ft of the feed line, on/off valve, 5-micron filter, and garden hose connector.
18in Outdoor Rated Fan - Weather Proof, High-Velocity Outdoor Fan
1x 4 Nozzle Slot (10/24 thread) Stainless Steel Misting Ring
1x Calcium Inhibitor Filter
20ft Feed Line
4x Misting Nozzles (10/24 thread. 0.012 orifices)
18 Inch Non Oscillating Fan
- Size: 18 inches
- Color: Black
- Mount Type: Wall mount
- CFM: 6300
- RPM: 1570
- Amps: 2.0
- Phase: 1
- HP: 1/10
Features:
- High-velocity airflow
- Durable and weather-resistant construction
- Suitable for outdoor use
- Adjustable tilt head for targeted airflow
- Non-oscillating design
- Power: Standard electric plug-in
Applications: Ideal for patios, decks, and other outdoor spaces where wall mounting is preferred
Installation: Easy wall mounting with provided hardware
15 Inch - 4 Nozzles
- Made with Industrial Grade 3/8'' Rigid Stainless Steel 316
- Compatible with all High and Mid Pressure Mist Pumps
- Pre-threaded nozzle slots for 10/24 Thread
- Rated for up to 2000PSI
- Attaches to any wall mount, floor, or pedestal fan
- Includes Push-lock Inlet Fitting
- Lifetime Warranty
- 15'' Fan Mist Ring with 4 Nozzle's ports - Recommended for fans with 18''-20" Diameter
- 15'' Fan Mist Ring with 6 Nozzle's ports - Recommended for fans with 18-20'' Diameter
- 15'' Fan Mist Ring with 8 Nozzle's ports - Recommended for fans with 20-30'' Diameter
- 25'' Fan Mist Ring with 10 Nozzle's ports - Recommended for fans with 30-48'' Diameter
Nozzle Flow Rate - GPM
Nozzle Flow Rate - GPH
It works with most 1/4" OD flexible tubing.
Depending on the Misting Pump size; Mid or High pressure. These would work for a softening system.
Mid Pressure: Calcium Inhibitor Filter - Poly Phosphate Filter: Link: https://mistcooling.com/misting-calcium-inhibitor-filter-poly-phosphate-filter.html
High Pressure: 5in Commercial Filter. Link: https://mistcooling.com/commercial-filter-for-mist-pumps.html
Any large than the filters mentioned would be recommended for Hard Water.
The cartridge inside the housing should be changed every 6 months
If you are on the website scowl down to Description or Specifications.
Filter housings are rated for up to 125psi.
5 microns. You don't need to worry much about the GPM as this is used before the pump. You just want to make sure that the filter is changed every six months so that the unit doesn't struggle to get water through to the pump.