Pool Cover Anchor - Brass Anchor for Pool Safety Cover - 5 Pack
Pool Cover Anchor | Pool Safety Hardware
- Retractable Swimming pool safety cover brass anchors
- Octagon Allen head hole for screwing the anchors into and out as they are needed
- Not affected by pool chemicals
- Brass anchor assembly for in-ground swimming pool safety covers and mesh covers.
- 5/8" Anchor. Fits a 3/4" Hole.
- Designed to work with Concrete and Pavers, Deck Works with most major brand pool safety covers
It works with most 1/4" OD flexible tubing.
Depending on the Misting Pump size; Mid or High pressure. These would work for a softening system.
Mid Pressure: Calcium Inhibitor Filter - Poly Phosphate Filter: Link: https://mistcooling.com/misting-calcium-inhibitor-filter-poly-phosphate-filter.html
High Pressure: 5in Commercial Filter. Link: https://mistcooling.com/commercial-filter-for-mist-pumps.html
Any large than the filters mentioned would be recommended for Hard Water.
The cartridge inside the housing should be changed every 6 months
If you are on the website scowl down to Description or Specifications.
Filter housings are rated for up to 125psi.
5 microns. You don't need to worry much about the GPM as this is used before the pump. You just want to make sure that the filter is changed every six months so that the unit doesn't struggle to get water through to the pump.