Patio Mister - DIY Outdoor Cooling Misting Kit
DIY Kit includes:
UV coated 3/8in flexible tubing
25x Nickle plated nozzles 0.015 Orifice 10/24 thread
4x Nozzle Plugs
23x 3/8in Misting Tees
1x 3/8in Compression Tee
2x 3/8in End Elbow
2x 3/8in Compression Elbow
2x 3/8in Coupling Union
50x Mounting Clamps
1x 5 micron in-line water filter prevents clogging of nozzles
1x Garden Hose3/4 thread garden hose
Y Connector (Sold Separately)
Features
Leakproof compression fittings
UV-coated flexible tubing
5-micron in-line water filter prevents clogging of nozzles
Adjustable mist direction
Attaches to any garden hose or spigot
Operates on city water pressure 50-120PSI
Includes mounting clamps
Easy to install and expand
Specially designed low-flow Mist Nozzles use less than 12 Gallons per hour. The average garden hose produces up to 450 Gallons during the same time period!
It works with most 1/4" OD flexible tubing.
Depending on the Misting Pump size; Mid or High pressure. These would work for a softening system.
Mid Pressure: Calcium Inhibitor Filter - Poly Phosphate Filter: Link: https://mistcooling.com/misting-calcium-inhibitor-filter-poly-phosphate-filter.html
High Pressure: 5in Commercial Filter. Link: https://mistcooling.com/commercial-filter-for-mist-pumps.html
Any large than the filters mentioned would be recommended for Hard Water.
The cartridge inside the housing should be changed every 6 months
If you are on the website scowl down to Description or Specifications.
Filter housings are rated for up to 125psi.
5 microns. You don't need to worry much about the GPM as this is used before the pump. You just want to make sure that the filter is changed every six months so that the unit doesn't struggle to get water through to the pump.