Pool Cooler - Residential

SKU
MC15100
$44.99

Pool cooler to cool swimming pool water PC-38In with easy installation and removal and reduces pool water temprature with use of evaporation and heat transfer principles.

Free: 1 pool plug for each order

For larger pools - please see our Commercial Pool Cooler

commercial_pool_cooler

Misting System By Applications

pool_cooler

Pool Cooler is a simple and economical solution to cool your swimming pool water during hot summer days. Pool mister effectively reduces pool water temperature with use of evaporation and heat transfer principles. Heat is removed through the pool water as it circulates through the pool cooler system resulting in a comfortable pool that you can finally enjoy. Cool mist curtain created by the pool cooler creates a refreshing feeling during hot summer days.

Deep Heat Removal

Pool Cooler increase the velocity of water being returned to the swimming pool, when it attach at the pool's circulation system, The result is a greater volume of surface water being dispersed to the floor of the pool-deep cooling while maximizing circulation. This deep heating removal feature highly compliments the effectiveness of solar pool covers and solar systems.

Pool Cooler is very easy to install and inexpensive to operate. It does not require any additional electricity to operate, simply attach it to the pool return jets. How does it work? - Pressurized return water going in to the pool passes through micro orifices of our pool cooler, creating a misting effect and facilitating evaporative cooling which reduces the heat from the pool water and lowers the temperature drastically. This allows you to enjoy refreshing swimmable water within 24-72 hours of installation.

Pool Mister Features Include:


  • Easy installation and removal.
  • Does not interfere with swimmers.
  • Decreases the pool water temperature by 7-12 degrees.
  • Operating cost is Zero.
  • Available for in-ground and above ground pools.
  • No additional electricity required
  • Kids love mist curtain.
  • Reduction in chemical consumption.
  • Extend Your Swim Season
  • Benefit from Cleaner, Healthier Water
  • Increase Solar Cover Performance
  • Sweep debris towards the main drain
  • Makes it Easier To Service Water Quality
  • Enjoy River Flow and Fountain Features
  • Will Pay for Itself and Keep Paying You Back

Mistcooling.com’s Pool Mister are the perfect and the best economical way to make comfortably cool of warm swimming pools water . Our swimming pool cooler is a simple design to solve the problem of hot pool water. Our Pool Cooler is a solution that is affordable, easy to install, zero operating cost, maintenance-free and inexpensive to operate. It does not require any power, Freon or gas to operate, just attach to the pool return jets The pool water works on a mistcooling evaporation principle, water circulates through the poolcooler system, removing the heat from the water instantly. Create a cool zone at the mist curtain that comes out into your pool, giving you a refreshing and comfortable feeling while swimming during the hot summer days. Not only will your pool be refreshing during those red hot summer months but your pool water chemistry will be easier to maintain. 8 to 10-degree drop in water temperature (95' to 85') can result in a savings of 20-25% on chemical consumption.

Mist Cooling Inc’s Pool Coolers are the best solution to the hot pool water problem


Why Poolcooler?


1. Compare the result to buy costly ($ 1799+) Pool Chillers, Vs mistcooling’s poolcooler which achieves nearly close results.(Reduce 8 to 10 degree)

2. It is a simple evaporating mistcooling based system, not a heat pump, so it neither requires Freon nor the expense of operating a heat pump.

3. It is easily incorporated into your existing pool return system.

4. It costs zero a day to operate.

How Mistcooling.com Pool Coolers work: Pressurized return water going in to the pool passes through micro orifices of our poolcooler creates a misting effect facilitating evaporative cooling which sucks the heat from the pool hot water and reduce the temperature drastically in a short period and gives you cool refreshing swimmable water.

Mistcooling Inc’s Pool Cooler features:


• Decreases the pool water temperature 8-10 degrees.

• Operating cost is Zero.

• Easy installation and removal, does not require glue, just slip.

• Runs with in-ground and above ground pool.

• Energy efficient .

• Kids love its mist curtain a lot.

• Increase the life of pool liners

• Will fully functional in less than 30 seconds.

Recomondation:

For best results, run your filtration system at night when the outside air is at its' coolest. It is also recommended to install The Pool Cooler at each end of your pool. However you can install as many as you got returns, we do also offer plug to block returns to increase the pressure at poolcooler misting of The Pool Cooler.


Recommended Quantity of pool coolers for

best results

# of Return Jets# Of Pool Coolers
21 to 2
31 to 2
42 to 3
53 to 4
63 to 5
7 or more4 to 6



Installation Video:


pool_cooler_install

Remove Eyeball or any fittings currently in the return outlet preferably by Pool Wall Adapter Removing Tool sold separately or Strap wrench. Screw the threaded adapter into the return outlet. Position the header pipe at the opening of the adapter with the top of the header pipe pointing towards 10 o’clock. While pressing the header pipe into the adapter*, straighten the pipe to an upright position. Next, insert the sprayer into the top of the header pipe with its holes positioned for the best return of the water into the pool. An extra plug is recommended to this kit in case more pressure is needed (in-ground only). Do not allow children to swing on The Pool Cooler. Remove Eyeball or any fittings currently in the return outlet preferably by Pool Wall Adapter Removing Tool sold separately or Strap wrench. Screw the threaded adapter into the return outlet. Position the header pipe at the opening of the adapter with the top of the header pipe pointing towards 10 o’clock. While pressing the header pipe into the adapter*, straighten the pipe to an upright position. Next, insert the sprayer into the top of the header pipe with its holes positioned for the best return of the water into the pool. An extra plug is recommended to this kit in case more pressure is needed (in-ground only). Do not allow children to swing on The Pool Cooler.

More Information
Visible in Catalog Print?Yes
Write Your Own Review
You're reviewing:Pool Cooler - Residential
Your Rating

FREE SHIPPING OVER $49.99 ....

COUPON CODE FB10 FOR 10% OFF - FOR ORDERS ABOVE $ 99.99

MOST ORDERS SHIP SAME DAY