Category: Mist Cooling INC

Although primarily mistcooling systems were built for outdoor cooling, the misting systems applications have evolved tremendously over the few years for specialized applications, some of which are listed below:

Application: Data Center Cooling

Data Center Cooling: Data centers use a lot of energy to keep the servers working. This generates a lot of heat, and just like your body, it requires cooling to keep the data center efficiency and keep the energy costs low.


Our commercial misting system with 3/8 Inch stainless steel tubing and 1500 PSI Misting Pump help create the required cooling.The features of the commercial misting system are:

  • 1500 PSI MIsting Pump
  • 3/8 Inch OD Flexible Nylon Tubing
  • 3/8 Compression Misting Parts and Accessories
  • Stainless Steel Misting Nozzles
  • For large scale Commercial Misting Applications including data centers, AC Pre-cooling, Dust Suppression Misting

    3 GPM Pump Specifications

    ● Maximum Outlet Pressure: 1500PSI
    ● Maximum Pump Speed (3 GPM.): 1750RPM
    ● Maximum Inlet Pressure: 125PSI
    ● Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded if the Pressure switch is
    ● Maximum Flow: 3 GPM (Refer to manufacturing label on pump)
    ● Voltage: 110V/ 220V AC (Refer manufacturing label on the pump)
    ● Oil Type: 10W40 Synthetic Motor Oil
    ● Oil Capacity: 11.8oz
    ● Maximum Fluid Temperature: For Room Temperature / Cold Water applications only


Application: Train Track Cooling:

Our misting systems have been used to provide cooling for railway tracks to enable faster turnaround for trains. By misting the tracks with our 1500 PSI High-Pressure Stainless Steel System at automated intervals helped cool the train tracks.

Features of Our Automated 1500 PSI Stainless Steel Misting System:

Misting Pump Features

  • Industry Leading max1500PSI Mist Pump specifically manufactured for Misting application;
  • Built-in Solenoid Valve
  • Built-in Low Water Cut off Switch
  • 5 Micron Commercial Water Filter
  •  Durable Enclosure • Outdoor Enclosure
  •  110v AC (Available in 220v on request)
  •  Max System expansion up to 160 Nozzles (Requires larger pump)
  •  Stainless Steel Orifice Ultrafine Misting Nozzles
  • Nickel Plated Brass High-Pressure Push Lock Fittings
  • Rigid Stainless Steel Tubing for Push Lock fittings
  • Lifetime warranty on Stainless Steel Tubing


4D Theaters Cinema Effect

Misting was required at certain times during the screening of a movie in a 4D theater. By using an interval timer, our 1500 PSI misting system was able to spray a fine mist on the audience to make the 4D experience a reality.

Features of our 1500 PSI Flexible Misting System

Base Kit Includes:

  • 1 – 1500 PSI Misting Pump
  • 10 – Stainless Steel Misting Nozzles ( 0.006″ Orifice – 10/24 Thread Size)
  • 40 FT – Flexible High Pressure Rated Nylon Tubing – Black Color
  • 10 – Nickle Plated Push Lok Misting Tees with 10/24 Threads
  • 2 – Nozzle Plugs
  • 1- Tube Cutter
  • All required fittings for Installation
  • View the Components Video Here





Having technical issues on your misting system. No worries, we are here to help with our most common how to videos to help you resolve your issues. We can still be reached 24 hours by email at: or by phone at 281 633 0109.

We have Videos for:


1500 PSI Misting Systems to cover the following topics:

  1. How to replace Pressure Switch on 1500 PSI Misting Pump
  2. How to  By-Pass Pressure Switch on 1500 PSI Misting Pump
  3. Increase/ Decrease Pressure on 1500 PSI Mistcooling Pump
  4. Install Filter on Mistcooling Pump
  5. How to Replace Bulkhead Assembly on 1500 PSI – 0.15 & 0.30 GPM 
  6. How to Connect and Remove Push Lock Fittings
  7. How to Change Seal Kit on 1500 PSI – 0.15 & 0.30 GPM 
  8. Changing Bearings on 1500 PSI Misting Pump – 0.15 GPM, & 0.30 GPM
  9. How to change oil on 1500 PSI Pump – 0.5, 1, & 2 GPM Misting Pump
  10. How to change ceramic piston on Misting Pump




cooling misting ceiling fan

Where we are in Texas, we are currently experiencing relief from the heat. Usually, driving to work, my car AC is struggling, and when I arrive at work, I have to put up a sunshade, risk rain in my car by cracking the windows, then enter my office sweaty. The office AC struggles to keep up with triple-digit temps, so we are all uncomfortably warm. When I leave in the afternoon, my car is still burning hot, and the AC is again struggling to cool triple-digit temperatures on the way home. At least this week, we have a break in the Houston area. Hopefully, it’s a trend. But here in the south and many other regions, it’s still hot during the fall, right up until Christmas some years.

Fall is a favorite time of year for many people, kids going back to school, lots of Holidays and opportunities for celebrations. I was thinking of one corporate party I attended last year around this time in an indoor/outdoor bar with a stage and dance floor, and how hot it was in different areas. That bar could use a cooling mist ceiling fan to help disburse cool air to all corners.

Mist Cooling Inc. developed a 360° Stainless-Steel Misting Fan System for just such venues as an indoor-outdoor bar, dance hall, or restaurant. It’s a 20″ 115 V ac, high-velocity outdoor-rated ceiling-mounted fan with the power to mist cool up to 1000 square feet. It is stainless steel with a stainless-steel mist ring and stainless-steel orifice cooling misting nozzles that are all rust and corrosion proof.

While I’m thinking of celebrations and leisure venues, this Misting Fan is useful for cool misting warehouses, industrial plants, greenhouses, and any area where it can be mounted 12-20 feet overhead.

Our work is guaranteed, and our customer service team is here to help you decide on the right system for you.

Happy Fall, Y’all! 

The Mist Cooling Inc Team

It is no surprise that at the end of August we are still HOT here in the South. What’s a little different is the severity of the heat not only here, but as far north as Boston, MA. We are back to Heat Advisories being issued in many cities and towns. We are lucky in the south as we have air conditioning pretty much everywhere, which I know isn’t necessarily so in the Northeast. We can put this 2018 summer into the history books!

So once again, 1) keep hydrated, 2) make sure your pets have water and shade, 3) carry a hand fan or misting pump bottle with you (we have the Windchiller Handheld Mist Fan), 4) include a portable misting system if you are out for the day in a park, camping, fishing, and the like, or make sure there is water nearby -even a garden hose to splash yourself, 5) take LOTS of breaks in the shade, 6) wear a hat or walk with and sit under an umbrella, 7) and don’t forget your sunglasses. Your eyes also need protection, and finally, 8) if you feel sick, dizzy, losing strength – head for medical attention ASAP!

You know that it will continue to be hot through September and likely October. It’s not too late to install a patio misting system. We recommend our 72FT Patio Mister (Multiple lengths available.) Includes everything you need to install and operate your misting system except the water. Completely pre-assembled, quick and easy to set up, connects to a standard garden hose and works with standard household water pressure. No electricity is needed to operate this low-pressure system.

Doesn’t matter whether you have a patio or a balcony, you will feel up to 30-Degrees F cooler using this system. That’s enough to keep you safe from the effects of boiling hot temperatures and will allow you to enjoy the outdoors.

Stay Cool-Stay Safe,
The Mist Cooling Inc Team

Cooling Misting for outdoors
Mist Cooling Inc Inflatable Misting Arc with Optional Misting Pump


PTOS AND SCHOOL FUNDS I remember when my son was in elementary, the first big PTO event was the school carnival. From digging in sand piles to find treasures like donated Happy Meal toys, to face painting, games, races, and cupcakes and pies for sale. These events are a lot of effort, but back then, I was up for it. Baking cupcakes to sell, helping with set up, take down, and run games. Those are precious times for a Mom and her kid(s). Dads even manage to show up which is really heart-warming. It all pays off with pictures for the annual yearbook and raises good money for much-needed school supplies and equipment around the school.

The PTO is a vital part of school life; I’ve seen the difference in areas where there is little to no parent involvement in poorer areas where parents have little to no time to donate to the school. So, if you have the time and even if you don’t have a little one, dive into this 2018-2019 school year and volunteer with resources to help out schools without a PTO! It genuinely makes a difference.

I cannot think of a cooler thing for a PTO to rent than Mist Cooling Inc’s Inflatable Mist Cooling Arc – it’s big, blue, and showy, and serves a purpose for those early hot school days, especially in concrete parking lots or on b-ball courts where many carnivals are held. It’s also available for purchase (use it year after year!) Brandable, i.e., “Lake Forest Elementary School” on the Arc’s top, sides, or both.  It’s durable, easy to clean, lightweight to carry (weighs 20 lbs when deflated), easy to set up and take down. Measures 16′ x 16′ x 12′ high when inflated. Reduces hot temperatures in the application area by up to 30°F. Hooks up to a common garden hose or spigot and operates on city water pressure. And it’s big, BLUE, and flashy! It would also make a wonderful football game entry Arc for your school team! Optional battery pack available.

See also our Inflatable Full-Size Mist Cooling Tent with 1500psi High-Pressure Cool Misting Pump for rent or to purchase. For more information, to rent, or to purchase, call 281.633.0109, email, or visit

Here’s wishing you a year full of PTO fundraising successes!

Mist Cooling Inc.

Cool Misting Full Size Tent
Inflatable Mist Cooling Tent with 1500psi High-Pressure Pump

  • 1
  • 2
  • 6
© 2002 - 2018 By All Rights Reserved.