MistCooling Inc following its legacy of innovation, now presents this premium quality and pre-fabricated 10 feet stainless steel mist line tube designed for non corrosive high pressure single piece loose fittings less leakproof application even at extreme high pressure, it also to reduce pressure loss due to friction over long runs. This stainless steel mist line is sold in 10 feet sections with 24 inch nozzle spacing between two nozzles. It has the ability to support up to 5 nozzles/section and rated to 3000 psi.
This is a DIY friendly mist line that can be installed within your misting system with ease even if you don’t have any prior experience. Once installed, it last for many many years due to its stainless steel construction with no loose fittings to leaks, its smooth inside surface can easily reduce the pressure loss that usually occurs due to sudden increase in pressure, friction, and corrossion over the period of running, due to its corrosion resistance Stainless steel 304 material of contruction, it reduce the vibration, long last for years and improve the misting performance of your system.
Its one piece fabricated design for entire 10ft long help to make ease and rapid installation.
It has a absolute no risk of leaks from the welded pre-threaded 10/24 or 12/24 UNC spigot for nozzle mounting which is the majore common leaks found on compression or push lock fitting under excessive pressure increase. Made in the US, so you can be confident of the quality.
|Visible in Catalog Print?||Yes|