|
Mistcooling.com’s
Pool Coolers are the perfect and the best economical way to make
comfortably cool of warm swimming pools water . Our swimming pool
cooler is a simple design to solve the problem of hot pool water. Our
Pool Cooler is a solution that is affordable, easy to install, zero
operating cost, maintenance free and inexpensive to operate. It does
not require any power, Freon or gas to operate, just attach to the pool
return jets The pool water works on a mistcooling evaporation
principle, water circulates through the poolcooler system, removing the
heat from the water instantly. Create a cool zone at the mist curtain
comes out into your pool, giving you a refreshing and comfortable
feeling while swimming during the hot summer days.
Not only will your pool be refreshing during those red hot summer
months but your pool water chemistry will be easier to maintain.
8 to 10 degree drop in water temperature (95' to 85') can result in a
savings of 20-25% on chemical consumption.
Mist
Cooling Inc’s Pool Coolers are the best solution
to
the hot pool water problem
Reasons:
1.
Compare the result to buy costly ($ 1799+) Pool Chillers,
Vs
only $34.00 mistcooling’s poolcooler
which achieve nearly close results.(Reduce 8 to 10 degree)
2.
It is a simple evaporating mistcooling based system not a heat pump, so
it neither require Freon nor the expense of operating a heat pump.
3.
It is easily incorporated into your existing pool return system.
4.
It costs zero a day to operate.
5.
Perfect solution for your hot pool water is problem!
How
Mistcooling.com Pool Coolers work:
Pressurized return water going in to the pool passes through micro
orifices of our poolcooler creates a misting effect facilitating
evaporative cooling which suck the heat from the pool hot water and
reduce the temperature drastically in a short period and gives you cool
refreshing swimmable water.
Mistcooling
Inc’s Pool Cooler features:
•
Decreases the pool water temperature 8-10 degrees.
•
Operating cost is Zero.
•
Easy installation and removal, does not require glue, just slip.
•
Runs with in-ground and above ground pool.
•
Energy efficient .
•
Kids love its mist curtain a lot.
•
Increase the life of pool liners
•
Will fully functional in less than 30 seconds.
Recomondation:
For best results, run your filtration system at night when the outside
air is at its' coolest. It is also recommended to install The Pool
Cooler at each end of your pool. However you can install as many as you
got returns, we do also provide plug to block returns to increase the
pressure at poolcooler misting of the
The Pool
Cooler.
Installation:
Remove any fittings currently in the return outlet preferably by Strap
wrench. Screw the threaded adapter into the return outlet. Position the
header pipe at the opening of the adapter with the top of the header
pipe pointing towards 10 o’clock. While pressing the header
pipe into the adapter*, straighten the pipe to an upright position.
Next, insert the sprayer into the top of the header pipe with its holes
positioned for the best return of the water into the pool. An extra
plug is added to this kit in case more pressure is needed (in-ground
only). Do not allow children to swing on The Pool Cooler. 
|
