| Spray
Pattern |
Category |
Spray
Angles |
Flow
Rate Range |
 |
"H"
- Hollow Cone
H-
series distributes the atomized
oil particles evenly toward the
outside of the the spray cone. These
nozzles are particularly well suited
for low firing rates and burners
with hollow air pattern. Normally
used in wider spray angles.
|
30°
45°
60°
70°
80°
90° |
.65
- 9.00 GPH
.40 - 9.00 GPH
.40 - 9.00 GPH
.40 - 9.00 GPH
.40 - 9.00 GPH
.50 - 9.00 GPH |
| |
 |
"EH"
Extra Hollow Cone
This
type "EH" is an extension of our
hollow cone series. Available from
4.00 GPH through 30.00 GPH. It is
specified in many commercial applications. |
45°
70° |
4.00-30.00 GPH
4.00-30.00 GPH |
| |
 |
"S-S" - Semi Solid Cone
Most
suitable for general applications
where exact air pattern or spray
pattern requirements can't be established.
Droplet distribution is relatively
even across spray cone in smaller
flow rates, but becomes more hollow
as flow rates increase. |
30°
45°
60°
70°
80°
90° |
.65-20.00 GPH
.40-35.00 GPH
.40-35.00 GPH
.40-35.00 GPH
.40-35.00 GPH
.50-20.00 GPH |
| |
 |
"B"
- Solid Cone
Designed
to give optimum combustion efficiency
on high static pressure flame retention
burners which specifically a "B"
pattern. As compared to our "ES"
pattern, somewhat more fuel is concentrated
towards the center of the spray. |
30°
45°
60°
70°
80°
90° |
.40
- 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH |
| |
 |
"ES"
- Solid Cone
Our
original solid cone series for low
flow rates. Available for applications
specifying a solid "ES" pattern. |
30°
45°
60°
70°
80° |
.40
- 1.75 GPH
.40 - 1.75 GPH
.40 - 1.75 GPH
.40 - 1.75 GPH
.40 - 1.75 GPH |
| |
 |
"P"
- Solid Cone
The
"P" type is an extension of our
"B" and "ES" series for firing rates
of 2.00 GPH and above. It produces
a solid cone pattern in the low
rates and becomes more hollow as
the flow rate increases. Specially
designed with a pocketed disc to
reduce combustion noises and pulsation.
|
30°
45°
60°
70°
80° |
2 -
15.00 GPH
2 - 15.00 GPH
2 - 15.00 GPH
2 - 15.00 GPH
2 - 15.00 GPH |
| |
 |
"LC"
- Large Capacity
These
nozzles are uniquely designed for
outstanding combustion in large
commercial burners. They have large
internal passageways to accommodate
high flow rates. They produce a
semi-solid "universal" pattern. |
45°
60°
80° |
35-120.00 GPH
35-120.00 GPH
35-120.00 GPH |
| |
 |
"W"
- Universal Nozzle
For
installations where the use of a
defined hollow or solid nozzle does
not provide the combustion result
desired. |
30°
45°
60°
70°
80°
90° |
.65
- 8.00 GPH
.40 - 8.00 GPH
.40 - 8.00 GPH
.40 - 8.00 GPH
.40 - 8.00 GPH
.50 - 8.00 GPH |
| |
 |
"DFN"
- Dual Filtration Available
in hollow (DFN-H) and solid cone
(DFN-B) patterns, the DFN nozzles
give enhanced protection against clogging
in the very low rates.
|
45°
60°
70°
80° |
.30
- 1.00 GPH
.30 - 1.00 GPH
.30 - 1.00 GPH
.30 - 1.00 GPH |
| |
 |
"Siphon"
Nozzle
Air
atomizing nozzle for the combustion
of waste oil and other variable
waste oil products. |
3PSIG-Air
4PSIG-Air
5PSIG-Air |
.20
- 1.00 GPH
.20 - 1.00 GPH
.30 - 1.00 GPH |
